LPC General Roller Information

1. Fractional Between Rails (BR) available
2. Light  Duty Gravity & Powered Rollers
   1" to 2-9/16" OD
3. Heavy Duty Gravity  & Powered Rollers
   3" to 8" OD
   
   
Gravity Rollers – non-powered rollers often used in gravity conveyor & belt driven conveyor 1" to 8" OD
1. Materials Available
   - Mild Steel
   - Galvanized Steel
   - Stainless Steel
   - Aluminum
   - PVC
2. Bearings Available (seals & shields options on all types)
   - Non-Precision – stamped metal housing, economical solution for light loads & slow speeds.
   - Semi-Precision – machined metal housing; heavy loads, high speeds, quiet operation
   - Presision - machined hardened and polished metal housing with or without polypropylene adapters; heavy loads, high speeds, quiet operation.
   - Plastic Bearings – plastic housing, stainless steel balls
   - Bushings – UHMW, hardwood, Teflon and nylon
3. Shafts from ¼" to 3-7/16"

Powered Rollers - Multiple sprockets & grooves available per roller

1. Place sprockets & grooves anywhere on roller
2. Materials Available
   - Mild Steel
   - Stainless Steel
3. Bearings Available (seals & shields options on all types):
   - Non-Precision – stamped metal housing, economical solution for light loads & slow speeds.
   - Semi-Precision – machined metal housing; heavy loads, high speeds, quiet operation
   - Presision - machined hardened and polished metal housing with or without polypropylene adapters; heavy loads, high speeds, quiet operation.
   - Bushings – UHMW, hardwood, Teflon and nylon
   • Grooved Rollers – round urethane belt driven rollers used in lineshaft conveyor
     1-3/8" to 2-1/2" OD
   • Shafts from ¼" to ¾"
     
     
   • Sprocketed Rollers – chain driven, powered rollers used in chain driven live roller (CDLR) applications.
     1.9" OD to 8" OD
     Sprocket Options:
     - Wide variety of widths, diameters and pitches, standards are 40,50,60 and 80 series A-plate.
     - A,B,C-Hub in single, double, triple and quad strands
   • Shafts from ¼" to 3-7/16"

1. Standard Tapers – 2-1/2" to 1-11/16" OD x 11 gauge; 1-1/2" to 1" OD 18 gauge
2. True Tapers – Small end down to 1-3/8" OD, large end up to 8" OD
3. Material available:
   - Mild steel
   - Stainless steel
4. Concave, Bow Tie and other formed gravity or power rollers

Options Available

1. Finishes
   - Heat treat
   - Zinc plating
   - Nickel plating
   - Chrome plating
2. Coating Options
   - Urethane & Vinyl Sleeves
   - Rubber, Urethane Plastic Coatings
   - Powder Coating
3. Axle Options (Hex or Round)
   - Mild steel and Stainless steel
4. Retentions
   - Spring
   - Cotter Pin
   - Fixed
   - Hog Ring
   - Snap Ring
   - Tapped Ends
   - Threaded Ends
   - Milled Flats
   - Keeper Bar Slot